Pull and Push

Pull and Push

Hydraulic Tube Bundle Extractor

Hydraulic tube bundle extractor

Pull and Push

No more Fork Lift or traditional way with small cranes to Pull and Push tubes or small tubes bundles in oil refinery or chemical plants!

The unit is self supportive, due to the use of an air cooled Hatz diesel engine, it needs just a crane to be lifted into position.

The engine, equipped with a spark arrestor in order to be used also in hazardous areas, drives an hydraulic pump and is equipped with an hydraulic winch that can Pull and Push the most obstinate tube and/or tube bundle in one stroke, normally in less than 10 minutes !

All hydraulic functions are remotely controlled, allowing a reduction in personnel and increasing the safety of the operators. When the tube or the tube bundle is completely on the machine, the load is balanced using an hydraulic cylinder. Furthermore, due to the slim and super light construction of the balancing system, accessibility to the tube or the heat exchanger and its surrounding obstacles is increased, and there is no need anymore to disassembly the superstructure while lifting the tube bundle or the tube out from the chassis of the machine.

Max Winch pulling/pushing force up to 15 tons and hydraulic power pack supplied with Hatz diesel engine and spark arrestor.

Pull and Push Technical data

PULL AND PUSH 5 Tons
Lenght6600 mm./ 21,65 feet
Maximum Height1880 mm./ 74 Inches
Width(without arch.)800 mm./ 32 Inches
Weight(unloaded)1600 Kg./ 3500 Inches
Maximum bundle lenght6000 mm/ 20 feet
Maximum bundle diameter1000 mm / 40 Inches
Maximum winch pulling force10000 Kg./ 22046 Ibs
Maximum bundle weight5000 Kg./ 11000 Ibs
Winch pulling speed2500 mm/min. – 8,2 feet/min
Pump working pressure200 Bars / 2900 psi
PULL AND PUSH 10 Tons
Lenght7000 mm./ 23 feet
Maximum Height1880 mm./ 74 Inches
Width(without arch.)1000 mm./ 40 Inches
Weight(unloaded)1800 Kg./ 4000 Inches
Maximum bundle lenght6400 mm/ 21 feet
Maximum bundle diameter1000 mm / 40 Inches
Maximum winch pulling force10000 Kg./ 22046 Ibs
Maximum bundle weight10000 Kg./ 22046 Ibs
Winch pulling speed2500 mm/min. – 8,2 feet/min
Pump working pressure200 Bars / 2900 psi
PULL AND PUSH 15 Tons
Lenght7400 mm./ 25 feet
Maximum Height1880 mm./ 74 Inches
Width(without arch.)1200 mm./ 48 Inches
Weight(unloaded)2000 Kg./ 4400 Inches
Maximum bundle lenght7000 mm/ 23 feet
Maximum bundle diameter1500 mm / 60 Inches
Maximum winch pulling force10000 Kg./ 22046 Ibs
Maximum bundle weight15000 Kg./ 33069 Ibs
Winch pulling speed2500 mm/min. – 8,2 feet/min
Pump working pressure200 Bars / 2900 psi

NEW PULL AND PUSH 20Tons
Lenght7400 mm./ 25 feet
Maximum Height1880 mm./ 74 Inches
Weight without arch2000 Kg./ 4400 Inches
Weight with arch2500 Kg./ 5110 Inches
Maximum bundle lenght7000 mm/ 23 feet
Maximum bundle diameter1600 mm / 63 Inches
Maximum winch pulling force10000 Kg./ 22046 Ibs
Maximum bundle weight20000 Kg./ 44092,452 Ibs
Winch pulling speed2500 mm/min. – 8,2 feet/min
Pump working pressure200 Bars / 2900 psi

Pull and Push ENGINE: silent-pack HATZ model 1D90W

Number of cylinders1
Cubic capacity722 CC
R.P.M.3000
Horse power16 HP
Cooling systemair

Video

New Pull and Push 15 tons by idrojet